Click on a Countersunk Finishing Washer type above to continue shopping…
Countersunk Finishing Washers
Countersunk finishing washers are round formed washers that are designed to be used with flat and oval head screws such as wood screws, sheet metal (tapping) screws and machine screws. Being raised and convex, they accept standard 82° countersunk heads.
Countersunk finishing washers provide a large bearing surface as well as a finished appearance. It is not necessary to use a countersink to create a countersunk recess (a beveled opening) in the mating surface when using countersunk finishing washers with countersunk heads.
Washer size refers to its nominal hole size and is based on screw size. Its outside diameter (OD) is always larger. Size is usually specified as a number (#6 for example) for smaller sizes, and in fractional inches for larger sizes (like 1/4").
Countersunk finishing washers are commonly available in three materials: brass, stainless steel and steel. Common finishes include nickel plating for brass and steel, and zinc plating for steel.
They are also known as:
Product(s) added successfully!