A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 915 Hex Socket Set Screws Dog Point

DIN 915 Hex Socket Set Screw Dog Point

DIN 915 Hex Socket Set Screws Dog Point are known for their cylinder-shaped point, the diameter of which ranges from roughly 62.5% to 75% of the nominal screw diameter. They can press against a ground flat or, as a replacement for a dowel pin, mate with a shaft hole for permanent or fixed component location. These external machine screw threaded headless screws are suitable for use with hollow tubing and hardened members. A hex key or hex bit is used for driving; hex size is half the screw size except for sizes M1.6, M2, M2.5, M14, M18 and M22. Select from Class 45H plain finish steel and stainless steel. Steel thread tolerance is 5g6g and stainless steel is 6g; right-hand threads are standard. Tensile loading is not recommended so use in compression only. Point length is based on screw diameter and length but does not uniformly increase as screw length increases. For example, point length for M6 x 8 mm and below is 1.50-1.75 mm but is 3.00-3.25 mm for M6 screw lengths 10 mm and above. Length includes the point so measure from end to end. DIN 915 Hex Socket Set Screws Dog Point are the same as ISO 4028.

Filters

Size:

Size

-- Select --
Length:

Length

-- Select --
Grade:

Grade

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
Code Product Qty. Package Qty. Carton Add to Basket
SGT563-560 M2-0.4 x 6 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT563-580 M2-0.4 x 8 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT563-600 M2-0.4 x 10 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT576-580 M2.5-0.45 x 8 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT576-600 M2.5-0.45 x 10 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT576-602 M2.5-0.45 x 12 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT586-540 M3-0.5 x 4 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW586-540 M3-0.5 x 4 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT586-550 M3-0.5 x 5 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW586-550 M3-0.5 x 5 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT586-560 M3-0.5 x 6 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW586-560 M3-0.5 x 6 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT586-580 M3-0.5 x 8 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW586-580 M3-0.5 x 8 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT586-600 M3-0.5 x 10 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW586-600 M3-0.5 x 10 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT586-602 M3-0.5 x 12 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT586-604 M3-0.5 x 14 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT586-606 M3-0.5 x 16 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT586-610 M3-0.5 x 20 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT602-530 M4-0.7 x 3 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT602-540 M4-0.7 x 4 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGT602-550 M4-0.7 x 5 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)
SGW602-550 M4-0.7 x 5 mm Hex Socket Set Screw Dog Point DIN 915, A2 Stainless Steel
SGT602-560 M4-0.7 x 6 mm Hex Socket Set Screw Dog Point DIN 915, Class 45H, Plain Finish (no rust protection)

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.