A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 914 Hex Socket Set Screws Cone Point

DIN 914 Hex Socket Set Screw Cone Point

DIN 914 Hex Socket Set Screws Cone Point have a point with an angle of 120° or 90° based on size and length. This headless screw has external machine screw threads and is often used for the permanent location of parts because it affords the greatest axial and torsional holding power due to deep point penetration. In addition, they function as pivots and hanger points. A hex key or hex bit half the screw size is used to drive them except for sizes M1.6, M2, M2.5, M14, M18 and M22. Available in plain finish Class 45H steel and stainless steel. Thread tolerance is 5g6g for steel and 6g for stainless steel; right-hand threads are standard. Use in compression since they are not intended to be tensile loaded. Length is measured from end to end. DIN 914 Hex Socket Set Screws Cone Point are the same as ISO 4027.

Filters

Size:

Size

-- Select --
Length:

Length

-- Select --
Grade:

Grade

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
Code Product Qty. Package Qty. Carton Add to Basket
SGK563-525 M2-0.4 x 2.5 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK563-530 M2-0.4 x 3 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP563-530 M2-0.4 x 3 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK563-540 M2-0.4 x 4 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK563-550 M2-0.4 x 5 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK563-560 M2-0.4 x 6 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK563-580 M2-0.4 x 8 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK563-600 M2-0.4 x 10 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK576-530 M2.5-0.45 x 3 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK576-540 M2.5-0.45 x 4 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP576-540 M2.5-0.45 x 4 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK576-550 M2.5-0.45 x 5 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP576-550 M2.5-0.45 x 5 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK576-560 M2.5-0.45 x 6 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK576-580 M2.5-0.45 x 8 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK576-600 M2.5-0.45 x 10 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK576-602 M2.5-0.45 x 12 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGK586-530 M3-0.5 x 3 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP586-530 M3-0.5 x 3 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK586-540 M3-0.5 x 4 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP586-540 M3-0.5 x 4 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK586-550 M3-0.5 x 5 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP586-550 M3-0.5 x 5 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel
SGK586-560 M3-0.5 x 6 mm Hex Socket Set Screw Cone Point DIN 914, Class 45H, Plain Finish (no rust protection)
SGP586-560 M3-0.5 x 6 mm Hex Socket Set Screw Cone Point DIN 914, A2 Stainless Steel

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.