A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 912 Socket Head Cap Screws

PDF file iconDIN 912 SpecificationsPDF file iconMetric Fastener Data
DIN 912 Socket Head Cap Screw

DIN 912 Socket Head Cap Screws have a small diameter cylindrical head, a hex socket recess and external machine screw threads; the side of the head may be plain or knurled. Internal wrenching allows for close screw spacing and the head can be recessed in a counterbored hole. Unlike inch series screws, which are available in a single strength grade, steel metric socket head cap screws are available in three grades: Class 8.8, 10.9 and 12.9. There may also be three grades in stainless steel: Class 50, 70 and 80; most are Class 70 (A2-70, A4-70) and some are Class 80 (A4-80), but unusual sizes could be Class 50. Consequently, check the head marking and replace metric socket head cap screws with the same Class. Available in zinc plated and plain finish (unplated) steel, stainless steel and nylon; A2 stainless steel compares to 18-8 and A4 to 316. Thread tolerance is 5g6g for Class 12.9 and 6g for Class 8.8 and 10.9 and stainless steel; right-hand threads are standard. Measure length from under the head to the tip. DIN 912 Socket Head Cap Screws are similar to ISO 4762 and ANSI B18.3.1M. DIN 7980 High Collar Split Lock Washers and DIN 433 Small Pattern Flat Washers are small OD (outside diameter) washers that are used with socket head cap screws.

Print Print Tell a Friend Tell a Friend
Pages: ◄ ► 1 2 3 4 5 …108

Filters

Size:

Size

-- Select --
Length:

Length

-- Select --
Grade:

Grade

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
?Help
Code Product Qty. Package Qty. Carton
SFC545-530 M1.4-0.3 x 3 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SFC545-540 M1.4-0.3 x 4 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SFC545-550 M1.4-0.3 x 5 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK545-560 M1.4-0.3 x 6 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SFC545-560 M1.4-0.3 x 6 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK551-530 M1.6-0.35 x 3 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SDP551-530 M1.6-0.35 x 3 mm Socket Head Cap Screw DIN 912, Class 12.9, Zinc Plated (14 hr Bake)
SFA551-530 M1.6-0.35 x 3 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
SFC551-530 M1.6-0.35 x 3 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK551-540 M1.6-0.35 x 4 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SDP551-540 M1.6-0.35 x 4 mm Socket Head Cap Screw DIN 912, Class 12.9, Zinc Plated (14 hr Bake)
SFA551-540 M1.6-0.35 x 4 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
SFC551-540 M1.6-0.35 x 4 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK551-550 M1.6-0.35 x 5 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SFA551-550 M1.6-0.35 x 5 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
SFC551-550 M1.6-0.35 x 5 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK551-560 M1.6-0.35 x 6 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SDP551-560 M1.6-0.35 x 6 mm Socket Head Cap Screw DIN 912, Class 12.9, Zinc Plated (14 hr Bake)
SFA551-560 M1.6-0.35 x 6 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
SFC551-560 M1.6-0.35 x 6 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SDK551-580 M1.6-0.35 x 8 mm Socket Head Cap Screw DIN 912, Class 12.9, Plain Finish (no rust protection)
SDP551-580 M1.6-0.35 x 8 mm Socket Head Cap Screw DIN 912, Class 12.9, Zinc Plated (14 hr Bake)
SFA551-580 M1.6-0.35 x 8 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
SFC551-580 M1.6-0.35 x 8 mm Socket Head Cap Screw DIN 912, A4 Stainless Steel
SFA551-600 M1.6-0.35 x 10 mm Socket Head Cap Screw DIN 912, A2 Stainless Steel
Pages: ◄ ► 1 2 3 4 5 …108

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.