A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 9021 Fender Washers

PDF file iconDIN 9021 SpecificationsPDF file iconMetric Fastener Data
DIN 9021 Fender Washer

DIN 9021 Fender Washers, without chamfer, are flat washers with a large outside diameter, which is about 3 times their nominal size (denoted as ~3d). "Without chamfer" means the outside edge on one side isn't beveled. Their extra-wide bearing surface is favored when confronted with oversized and irregularly shaped holes and soft materials that require extra support. Materials and finishes include steel, zinc plated and plain finish (can rust), and stainless steel. Steel washers ≤16 mm are Class 140 HV and >16 mm are 100 HV; all sizes of stainless steel are 140 HV. Hardness Class 100 HV washers are suitable for use with bolts/screws Class 6.8 and below and nuts Class 6 and below; use 140 HV with bolts/screws below Class 8.8 and nuts below Class 8. Choose a washer size, as listed by its nominal hole size, to match the screw size (for example, use an M6 washer with an M6 screw). DIN 9021 Fender Washers may be the same as ISO 7093.

Print Print
Pages: ◄ ► 1 2 3

Filters

Size:

Size

-- Select --
Grade:

Grade

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
?Help
Code Product Qty. Package Qty. Carton
WJK719-500 M16 Fender Washer (~3d OD) DIN 9021, Class 140 HV, Zinc Plated
WJL719-500 M16 Fender Washer (~3d OD) DIN 9021, Class 140 HV, Zinc Yellow Plated
WJM719-500 M16 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A2 Stainless Steel
WJN719-500 M16 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A4 Stainless Steel
WJK730-500 M18 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Zinc Plated
WJM730-500 M18 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A2 Stainless Steel
WJJ739-500 M20 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Plain Finish (no rust protection)
WJK739-500 M20 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Zinc Plated
WJL739-500 M20 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Zinc Yellow Plated
WJM739-500 M20 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A2 Stainless Steel
WJN739-500 M20 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A4 Stainless Steel
WJK747-500 M22 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Zinc Plated
WJK756-500 M24 Fender Washer (~3d OD) DIN 9021, Class 100 HV, Zinc Plated
WJM756-500 M24 Fender Washer (~3d OD) DIN 9021, Class 140 HV, A2 Stainless Steel
Pages: ◄ ► 1 2 3

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.