A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 6799 External E-Type Circlips

DIN 6799 External E-Type Circlip

DIN 6799 External E-Type Circlips are retaining rings that resemble the letter "E" and are said to be the most widely used radial retaining ring. Installed at a right angle to the shaft (radially) using a retaining ring applicator due to an absence of lug holes, they snap into a machined groove in the shaft. Prongs contact the groove bottom at three points allowing them to form a large protruding removable shoulder that effectively retains components. They are usually more economical than axially installed retaining rings but can only accommodate low thrust loads because of minimal contact with the shaft's circumference. Size is specified as groove diameter rather than shaft diameter like axially installed rings. Measure circlips using a pin gauge that contacts all three prongs. Available in plain finish and zinc plated spring steel and stainless steel.

Filters

Size:

Size

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
Code Product Qty. Package Qty. Carton Add to Basket
RCA539-500 M1.2 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA546-500 M1.5 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA559-500 M1.9 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA560-500 M2 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA568-500 M2.3 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD568-500 M2.3 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA589-500 M3.2 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD589-500 M3.2 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA600-500 M4 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD600-500 M4 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA615-500 M5 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD615-500 M5 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA631-500 M6 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD631-500 M6 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA646-500 M7 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD646-500 M7 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA659-500 M8 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCD659-500 M8 External E-Type Circlip DIN 6799, DIN 1.4116/1.4122/1.4034 Stainless Steel
RCA674-500 M9 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA688-500 M10 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA701-500 M12 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA716-500 M15 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA727-500 M17 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA738-500 M19 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish
RCA756-500 M24 External E-Type Circlip DIN 6799, Spring Steel, Plain Finish

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.