A Fastener Megastore™ with Lower Prices and Volume Discounts!

Nail-In Anchors, Nylon, Mushroom Head, Steel Nail

Nail-In Anchors, Mushroom Head

Also known as:  

Drive Nail Anchors, Drive Pin Anchors, Nail-Ins, Nylon Hammer Drive Anchors

Nylon Nail-In Anchors are light duty, pre-assembled nail drive type anchors that are used for mounting in concrete, block, brick and stone. To install, drill a hole the same diameter as the anchor (3/16" or 1/4") and at least 1/4" deeper than the embedment depth, blow the hole clean and insert the anchor through the fixture and into the hole. Drive the nail flush with the head to expand the body and lock the anchor in place. For Mushroom heads, measure length from under the head. For Flat heads, length includes head height. Do not use Nylon Nail-In Anchors for overhead applications.

Print Print Tell a Friend Tell a Friend
Code Product Qty. Package Qty. Carton
AN187-8452 3/16 x 3/4" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-0452 3/16 x 1" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-2452 1/4 x 3/4" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-3452 1/4 x 1" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN192-6223 1/4 x 1 1/2" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-6462 1/4 x 1 1/2" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-8462 1/4 x 2" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-0462 1/4 x 3" Mushroom Head Nail-In Anchor, Nylon, Steel Nail
AN187-1462 1/4 x 4" Mushroom Head Nail-In Anchor, Nylon, Steel Nail