Volume Discounts and Low Prices!

T-Anchors, Zinc Dichromate Plated

T-Anchor

Also known as:  

Stud Toggle Anchors, Hollow Wall Anchors

T-Anchors are medium duty, gravity operated hollow wall and ceiling anchors used in concrete block, steel and wood. With the supplied nut and washer installed, position the toggle head to be in-line with the threaded anchor stem and insert through the fixture and into a drilled hole. After the toggle head enters the hollow space, gravity causes it to pivot and act as a retaining bar; tighten the nut until the anchor is set. The hole size required for T-Anchors is smaller than similarly sized toggle bolts. Use a 5/16" drill bit for 1/4" and 5/16" T-Anchors, and a 3/8" drill bit for 3/8" anchors.

Print
Code Product Qty. Package Qty. Carton  
AN138-3932 1/4 x 1 3/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-4942 1/4 x 2 1/2" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-5942 1/4 x 3 1/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-6942 5/16 x 2 1/2" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-7942 5/16 x 3 1/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-8942 5/16 x 3 3/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-9942 3/8 x 3 1/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-0942 3/8 x 3 3/4" T-Anchor with Nut and Washer, Zinc Dichromate Plated
AN138-1942 3/8 x 4 1/2" T-Anchor with Nut and Washer, Zinc Dichromate Plated