A Fastener Megastore™ with Lower Prices and Volume Discounts!

DIN 931 Hex Head Bolts

PDF file iconDIN 931 SpecificationsPDF file iconMetric Fastener Data
DIN 931 Hex Head Bolt

DIN 931 Hex Head Bolts have a hex head, external machine screw threads and are partially threaded with coarse threads. These externally wrenched bolts are used with nuts and internally threaded holes. Dimensionally similar to ISO 4014, they are available in Class 8.8, 10.9 and 12.9 steel; in stainless steel, most are Class 70 (A2-70, A4-70), some are Class 80 (A4-80) and some uncommon sizes may be Class 50. Zinc plating offers corrosion protection for steel while plain finish lacks a surface treatment to prevent rust. A2 stainless steel is equivalent to 18-8 and A4 is comparable to 316. Also referred to as hex head cap screws, minimum threaded length is based on bolt diameter and bolt length. Thread tolerance for Class 8.8 and 10.9 is 6g for plain finish and 6h for plated; it is 6g for stainless steel; right-hand threads are standard. Measure bolt length from under the head to the tip. DIN 931 Hex Head Bolts are similar to ISO 4014, JIS B1180 and ANSI B18.2.3.1M. Use DIN 933 if you need fully threaded or DIN 960 for partially threaded with fine threads. (Note: Thread pitch, which is the distance from thread to thread, is usually not specified for coarse threaded fasteners but is listed for reference.)

Print Print
Pages: ◄ ► 1 2 3 4 5 …79

Filters

Size:

Size

-- Select --
Length:

Length

-- Select --
Grade:

Grade

-- Select --
Material:

Material

-- Select --
Finish:

Finish

-- Select --
?Help
Code Product Qty. Package Qty. Carton
BCB602-610 M4-0.7 x 20 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-615 M4-0.7 x 25 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-615 M4-0.7 x 25 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-620 M4-0.7 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-620 M4-0.7 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCC602-620 M4-0.7 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Yellow Plated
BCA602-625 M4-0.7 x 35 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-625 M4-0.7 x 35 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-630 M4-0.7 x 40 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-630 M4-0.7 x 40 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCC602-630 M4-0.7 x 40 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Yellow Plated
BCB602-635 M4-0.7 x 45 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-640 M4-0.7 x 50 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-640 M4-0.7 x 50 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-645 M4-0.7 x 55 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-645 M4-0.7 x 55 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA602-650 M4-0.7 x 60 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB602-650 M4-0.7 x 60 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA618-604 M5-0.8 x 14 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCA618-612 M5-0.8 x 22 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCA618-615 M5-0.8 x 25 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB618-615 M5-0.8 x 25 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCA618-620 M5-0.8 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Plain Finish (no rust protection)
BCB618-620 M5-0.8 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Plated
BCC618-620 M5-0.8 x 30 mm Hex Head Bolt Partially Threaded DIN 931, Class 8.8, Zinc Yellow Plated
Pages: ◄ ► 1 2 3 4 5 …79

Product Filter Help

It's easy and fast to find the exact item you're looking for using these filters. Depending on the item, you can filter by Size (diameter and thread), Length, Grade/Class, Material and Finish/Plating. Here's how…

  • Click in a Select box to view the options. It may be necessary to scroll to see the entire list. The number of matching items is displayed in parentheses ( ).
  • Click on the desired item and -- Select -- will change to 1 Selected. You can select more than one item in each Select box. For example, you can select two sizes and 1 Selected will change to 2 Selected.
  • Click in other Select boxes and make more choices. Available options will be based on selections you've already made.
  • Even though there are thousands of fasteners to choose from a particular material or finish may not be available in every size and length. So, try different combinations of filters like Size, Grade and Material to see matching Lengths and Finishes.
  • To deselect a single filter option, click in the Select box and click on the selected option. It will appear at the top of the list in bold. To clear all filter selections, click on the Clear Filters button.

Even after filtering there may be several pages of items. The number of pages will be displayed to the left of the Add All Selected Items button. Click on a page number or the arrows to page forward and back.

Press Esc to close this window.