Hammer Drive Anchors, Zinc Alloy, Stainless Steel Nail
Also known as:
Drive Nail Anchors, Drive Pin Anchors, Hammer Drive Nail-In Anchors, Nail-In Anchors, Nail-Ins
Hammer Drive Anchors are light duty, tamper resistant, pre-assembled nail drive type anchors that are used for permanent mounting in concrete, block, brick and stone. The anchor has a corrosion resistant Zinc Alloy body and either a Zinc Plated or Stainless Steel nail. To install, drill a hole the same diameter as the anchor (3/16" or 1/4") and at least 1/4" deeper than the embedment depth, blow the hole clean and insert the anchor through the fixture and into the hole. Drive the nail flush with the head to expand the body and lock the anchor in place. Measure length from under the Mushroom head. Do not use Hammer Drive Anchors for overhead applications.